|
|
The drill
sharpener that you've been asking for is here
Gives you all the
versatility and rigidity of a full-size universal tool and cutter
grinder in one simple machine.
With the Cutter master you will:
-
Stop all cutting tool related machine downtime.
-
Gain the ability to sharpen your entire cutting tools the way you
want them - Now.
-
Enable your machine tools to run at peak performance all the time
and improve the quality of your work - by machining with nothing but
razor sharp cutters.
-
Your cutting tools will cut 10 times better and last 20 times
longer. Because you'll know that you can regrind your cutting tools
within a few minutes you won't push them until they dull or even
break.
-
Reduce your tool crib inventory, and eliminate resharpening bills.
Features:
-
Grinds o.d.'s and ends of standard end mills in one setup within a
few minutes.
-
With the Z-Axis (optional) there are 8 different axes to work with
for unlimited versatility.
- 1
machine grinds end mills, roughing end mills, drills, taps,
countersinks, carbide tools, radius end mills, lathe tool bits,
various forms tools, reamers, performs gashing and much more!
-
Extremely versatile and can be used for more than standard cutting
tools
-
Extremely easy to use - and fast! The machine is always set up and
ready to go.
-
The Air Bearing Fixture (optional) is precision honed and capable of
grinding to close tolerances.
-
Air bearing has a 360-degree swivel base for taper grinding.
-
Takes standard 5c collets, with end mill holders available that can
hold shank sizes up to 2".
-
Tables made from cast iron and precision ground.
-
Motor comes standard with forward and reverse switch.
-
Motor/spindle assembly tilts to positive and negative angles;
cutting tool clearance angles can be adjusted as needed.
-
Available in metric or imperial graduations.
-
Grinding chart provides clearance angles for all end mills from
3/16" - 3".
Specifications:
- Air bearing stroke - 10.5" (266mm)
- Air bearing swing over table - 9.8" (248mm)
- Cutting tool capacity - 2" shank, 9.8" O.D., 10.5" flute length
- T-slot dimension - .800x.500x.670
- Table feed graduations - .001 or .02mm
- X-Axis table travel - 6"
- Y-Axis table travel - 3", plus motor slides back and forth 6"
- X-Axis table working space - 16.5"x5.5"
- Y-Axis working space - 13"x5.5"
- Wheel - 5" cup (or 6" dish with Z-axis), 1-1/4" arbor
- Motor tilt - +35/-8 degrees
- Motor - 1/3 hp, 3450rpm, 110V/60Hz or 220V/50Hz
- Net weight - 180 pounds/106 kilos
- Dimensions - 21"x20"x21" (not including handles)
- Shipping dimensions - 30"x28"x29"
Optional Accessories:
 |
Radius Attachment - Sharpen ball end
mills and corner radi £495 |
 |
Z-Axis - Enables the grinding spindle to rtavel
vertically 3-1/4", and swivel 180 degrees. With the Z-axis you
have the capabilities to grind roughing end mills, perform
gashing operations. The Z-Axis gives you some of the same
capabilities as a full size universal grinder. - No Longer
Available |
 |
Pneumatic Finger - Automatically sets clearance
angles for end mill o.d.'s with the flip of a switch. Can be
purchased separately, or is available packaged together with the
Cuttermaster at a special price. - No Longer Available |
 |
Workholding Fixture - Sharpens lathe bits and
form tools. P.O.A. |
|
 |
5C Collets [3mm - 25mm] & [1/8" - 1"]
£7.62 |
| |
Machine Stand £195 |
 |
Premium oxide Grinding Wheel - Standard every
day use wheel, 60 grit. P.O.A |
|
|
Our NEW 16 page
Full Colour
2007 Catalogue
is now available.
|
 |
|
